Production     
Company     
Services     
Guest book     
Our Contacts     
 

Products

Productions


   

Партнёры


www.liftcomplex.kz

www.angar-kazakhstan.kz















Welding equipment

Semiautomatic arc welding machine MIG 135-315 Semiautomatic arc welding machine MIG 135-315
Productions: KazTermosvar

Coolant Recirculator WK 23 / WK 43 Coolant Recirculator WK 23 / WK 43
Productions: Binzel

Trident 60-200 Trident 60-200
Productions: HUGONG

•      Three phare,recfifier plasma cutting,on wheels,fan cooled for power source.
•     For the Trident 40,60,air-cooling torch is used;water cooling torch is for Trident 160,200.For the Trident 120,both of the torch are available,if using water cooling torch the water tank is needed.
•     Ideal equipment for all conductive metal cutting in industry use.
Welding transformer TDM-303U2 Welding transformer TDM-303U2
Productions: Kavik

Welding transformer TDM-503U2 Welding transformer TDM-503U2
Productions: Kavik

Welding transformer TDM-161U2 Welding transformer TDM-161U2
Productions: Kavik

Welding transformer (fig.1) named henceforth "transformer" serves for feeding of one welding position by one-phase alternating current of 50 Hz frequency. On hand arch welding, cutting and fusing of metals coated by metal electrodes.
Welding transformer TDM-252U2 Welding transformer TDM-252U2
Productions: Kavik

Welding transformer serves for feeding of one welding position by one-phase alternating current of 50 Hz frequency. On hand arch welding, cutting and fusing of metals coated by metal electrodes.
Welding transformer TDM-403U2 Welding transformer TDM-403U2
Productions: Kavik

Welding transformer serves for feeding of one welding position by one-phase alternating current of 50 Hz frequency. On hand arch welding, cutting and fusing of metals coated by metal electrodes.
Concrete heating transformer TSDЗ-63/0,38 UЗ Concrete heating transformer TSDЗ-63/0,38 UЗ
Productions: Kavik

Concrete heating transformer is three-phase, double-wound dry with forced air cooling saved of performance for thermal heat treatment of concrete and frozen ground.
Welding rectifier VD-301 Welding rectifier VD-301
Productions: Kavik

Welding rectifier VD - 401 Welding rectifier VD - 401
Productions: Kavik

Welding rectifier VD - 501 Welding rectifier VD - 501
Productions: Kavik

Welding rectifier VDM-561C Welding rectifier VDM-561C
Productions: Kavik

Welding rectifier VDM - 1600C Welding rectifier VDM - 1600C
Productions: Kavik

UVPR CUT30-100 UVPR CUT30-100
Productions: KazTermosvar

Installations for argon-arc of welding Installations for argon-arc of welding
Productions: KazTermosvar

Welding rectifiers BDM 315-500 BD Welding rectifiers BDM 315-500 BD
Productions: KazTermosvar

Welding transformers TDM 200-630A Welding transformers TDM 200-630A
Productions: KazTermosvar

Welding transformers TDM 315-630M Welding transformers TDM 315-630M
Productions: KazTermosvar

Welding transformers TDM 160 - 300B Welding transformers TDM 160 - 300B
Productions: KazTermosvar

Welding transformers TDM 160-300C Welding transformers TDM 160-300C
Productions: KazTermosvar

Welding transformer TDM -140 Welding transformer TDM -140
Productions: Selma

is designed for manual arc welding by coated electrodes at alternating current of low carbon and low alloyed steel.
Welding Transformer TDM-180 Welding Transformer TDM-180
Productions: Selma

is designed for manual arc welding by coated electrodes at alternating current of low carbon and low alloyed steel.
Welding transformer TDM-200 Welding transformer TDM-200
Productions: Selma

is designed for manual arc welding by coated electrodes at alternating current of low carbon and low alloyed steel.
Welding transformer TDM - 250 Welding transformer TDM - 250
Productions: Selma

is designed for manual arc welding by coated electrodes at alternating current of low carbon and low alloyed steel.
Welding transformer TDM-315 Welding transformer TDM-315
Productions: Selma

is designed for manual arc welding by coated electrodes at alternating current of low carbon and low alloyed steel.
Welding transformer TDM-403 Welding transformer TDM-403
Productions: Selma

is designed for manual arc welding by coated electrodes at alternating current of low carbon and low alloyed steel.
Welding transformer TDM-450 Welding transformer TDM-450
Productions: Selma

is designed for manual arc welding by coated electrodes at alternating current of low carbon and low alloyed steel.


Technical parametersValue
Supply voltage, V
2 x380
Supply line frequency, Hz 50
Rated welding current, A (at duty cycle)400 (10%) / 180 (60%)
Welding current range control, A
80 - 200/150 – 360/275 – 470
Open circuit voltage, V, not over
74
Power consumption, kVa, not over 31
Electrode diameter, mm 2 - 6
Weight, kg 58
Overall dimensions, mm, not over 350x490x460


Features
      
    * Wide range continuous welding current control.
    * Simple design of welding current mechanical control by means of movable shunt.
    * Easy ignition and stable arcing.
    * High-powered and economical
    * Class of insulation is H.
    * Quick-demountable, secure current connectors.
    * Small weight and dimensions.
    * Installation of wheels are on additional order

Welding transformer TDM-505 Welding transformer TDM-505
Productions: Selma

is designed for manual arc welding by coated electrodes at alternating current of low carbon and low alloyed steel.
UGD - 161 UGD - 161
Productions: Selma

is designed for argon-arc welding (TIG mode) by non-consumable electrode at direct current of all types of metal and alloys except aluminum and its alloys, and for manual arc welding (MMA mode) by coated electrodes at direct current of low-carbon and low-alloyed steel.
UGD - 180 UGD - 180
Productions: Selma

is designed for argon-arc welding by non-consumable electrode (TIG mode) at alternating current of aluminum and its alloys, and for manual arc welding by coated electrodes (MMA mode) of low-carbon and low-alloyed steel.
UGDU-200 AC/DC (inverter installation) UGDU-200 AC/DC (inverter installation)
Productions: Selma

is designed for argon-arc welding by non-consumable electrode (TIG mode and for manual arc welding by coated electrodes MMA mode) at alternating(AC) and direct (DC) current) of all types of metal and alloys.
UGDU-251 AC/DC (with program control of a welding cycle ) UGDU-251 AC/DC (with program control of a welding cycle )
Productions: Selma

UDGU-251АС/DC device serves for argon and arch welding of all the metals by non- melting electrode (TIG mode) on constant and alternating current and for hand arch welding coated by electrodes (MMA mode).
Welding machine UDGU-501 AC/DC Welding machine UDGU-501 AC/DC
Productions: Selma

is designed for argon-arc welding by non-consumable electrode (TIG mode) and for manual arc welding by coated electrodes (MMA mode) at alternating AC) and direct (DC) current of all types of metal and alloys.
UVPR - 0401 UVPR - 0401
Productions: Selma

is designed for semiautomatic (with handle movement of cutting torch) or automatic (as a component of automatic machines) cutting of all types of metal and alloys or automatic (as a component of automatic machines) cutting of all metal and alloys.
UVPR - 100 UVPR - 100
Productions: Selma

is designed for semiautomatic(with handle movement of cutting torch) or automatic (as a component of automatic machines) cutting of all types of metal and alloys.
UVPR - 120 UVPR - 120
Productions: Selma

is designed for semiautomatic(with handle movement of cutting torch) or automatic (as a component of automatic machines) cutting of all types of metal and alloys.
UVPR - 200 UVPR - 200
Productions: Selma

is designed for semiautomatic(with handle movement of cutting torch) or automatic (as a component of automatic machines) cutting of all types of metal and alloys.
UVPR-400 UVPR-400
Productions: Selma

is designed for semiautomatic(with handle movement of cutting torch) or automatic (as a component of automatic machines) cutting of all types of metal and alloys.
Semiautomatic arc welding machine PDG-152 Semiautomatic arc welding machine PDG-152
Productions: Selma

is designed for semiautomatic welding at direct current by consumable electrode wire in the atmosphere of carbon dioxide of low carbon and low alloyed steel.
Semiautomatic welding machine PDG-200 Semiautomatic welding machine PDG-200
Productions: Selma

is designed for semiautomatic gas- shielded welding of low-carbon and low-alloyed steel by consumable electrode wire at direct current.
Semiautomatic welding machine PDG-252 Semiautomatic welding machine PDG-252
Productions: Selma

is designed for semiautomatic gas-shielded welding of low carbon and low alloyed steel by consumable wire at direct current.
Semiautomatic welding machine PDG-351 Semiautomatic welding machine PDG-351
Productions: Selma

is designed for semiautomatic gas-shielded welding of low carbon and low alloyed steel at direct current by consumable welding wire.
Device for argon and arch welding Superwave Device for argon and arch welding Superwave
Productions: HUGONG

welding semiautomatic device HGMIG welding semiautomatic device HGMIG
Productions: HUGONG

Welding rectifiers Welding rectifiers
Productions: HUGONG

Welding transformers АС, ВХ1 Welding transformers АС, ВХ1
Productions: HUGONG

Air-plasma cutting device UVPR-2001 Air-plasma cutting device UVPR-2001
Productions: Selma

The device serves for semi-automatic (with hand transferring of plasmotrone) or automatic (consisting of automatic machine) cutting of all types of metals and alloys.
Device for argon and arch welding UDGU-251АС/DC Device for argon and arch welding UDGU-251АС/DC
Productions: Selma

UDGU-251АС/DC device serves for argon and arch welding of all the metals by non- melting electrode (TIG mode) on constant and alternating current and for hand arch welding coated by electrodes (MMA mode).
Device for argon and arch welding UDGU-351АС/DC Device for argon and arch welding UDGU-351АС/DC
Productions: Selma

UDGU-251АС/DC device serves for argon and arch welding of any metals except aluminum by non-melting electrode (TIG mode) on constant and alternating current and for hand arch welding coated by electrodes (MMA mode). It has switching of alternating/constant current (AC/DC).
Semi-automatic device PDG-251 Semi-automatic device PDG-251
Productions: Selma

The semi-automatic welding device PDG-251 with in-built haulage device serves for semi-automatic welding of things made of steel at a constant current in shielding gas medium. The 15 kg cassette of welding wire is used.
Welding rectifier VD-306 A Welding rectifier VD-306 A
Productions: Uraltermosvar

It serves for application as the power source of one welding position at hand arch welding, cutting and fusing of metals by a constant current.It allows making welding by piece-electrodes with any type of coating.
Welding rectifier VD-306M Welding rectifier VD-306M
Productions: Uraltermosvar

It serves for application as the power source of one welding position at hand arch welding, cutting and fusing of metals by a constant current.
Welding rectifiers VD-405 Welding rectifiers VD-405
Productions: Uraltermosvar

It serves for application as the power source of one welding position at hand arch welding, cutting and fusing of metals both by constant and by alternating current.
Welding rectifier VDU-506М Welding rectifier VDU-506М
Productions: Uraltermosvar

It serves for application as the power source of one welding position at semi-automatic, argon-arch and hand arch welding of things by a constant current.
Welding transformer ТДМ-403У2 Welding transformer ТДМ-403У2
Productions: Selma

Welding transformer serves for feeding of one welding position by one-phase alternating current of 50 Hz frequency. On hand arch welding, cutting and fusing of metals coated by metal electrodes.
Copyright 2009 KC Trade
P19B, Magnitnaya str., 050054, Almaty, Kazakhstan
Phone: +7 771 300 58 38
E-mail: info@kctrade.kz